Barrel Roll Camera Rigging Kit
Day Rate: $ 30.00
Quantity | Add/Remove |
This kit gives you everything you need to mount your camera directly overhead using a mitchell plate or 100mm ball. Included pipe may be exchanged for any length pipe.
Fluid head NOT included.
| Photo | Product | Quantity |
|---|---|---|
 | Cheese Plate - 10" x 14" x 3/8" 3/8" holes spaced 1" apart | 1 |
 | Cheese Plate - 12" x 12" x 3/8" 3/8" holes spaced 1" apart | 1 |
 | Self Aligning Ball Bearing for 1 1/2" Pipe | 2 |
 | Pipe Shim - 1 1/4" to 1 1/2" (2 piece) | 2 |
 | 1 1/4" Speed-Rail Cross Hollaender Fitting | 1 |
 | 1 1/4" Speed-Rail Short Barrel Cross Hollaender Fitting | 8 |
 | Half Proburger Clamp | 2 |
 | Cheese Plate Adapter | 1 |
 | Grid Clamp with Baby Pin Little Ben Clamp | 1 |
 | Rod, Stainless Steel - 5/8" x 16" | 1 |
 | Combination Camera Rod Starter | 2 |
 | 1 1/4" Pipe - 18 in | 2 |
| 1 1/4" Pipe - 2 ft | 2 |
| 1 1/4" Pipe - 15 in | 2 |
| 1 1/4" Pipe - 1 ft | 2 |
 | Mitchell Plate Adapter, 3/8" Threaded with Knob | 1 |
 | Bolt - 3/8" x 1 1/2" | 7 |
| Wing Nut - 3/8" | 7 |
| Fender Washer - 3/8" | 4 |
| Washer - 3/8" | 3 |
| Allen Wrench | 1 |
| Wrench | 1 |