Barrel Roll Camera Rigging Kit
This kit gives you everything you need to mount your camera
directly overhead using a mitchell plate or 100mm ball. Included
pipe may be exchanged for any length pipe.
Fluid head NOT included.
Fluid head NOT included.
Included in this package
| Qty | ||
|
Cheese Plate 7-1/2" x 10" x 3/8"
3/8" holes spaced 1" apart |
1 |
|
Cheese Plate - 10" x 10" x 1/2" (Mitchell Mount)
3/8" holes spaced 1" apart |
1 |
|
Self Aligning Ball Bearing for 1 1/4" Pipe | 2 |
|
1 1/4" Speed-Rail Cross
Hollaender Fitting |
1 |
|
1 1/4" Speed-Rail Short Barrel Cross
Hollaender Fitting |
8 |
|
Mini Half Proburger Clamp with 3/8" Thread & Bolt | 2 |
|
Cheese Plate Adapter | 1 |
|
Grid Clamp with Baby Pin
Little Ben Clamp |
1 |
|
Rod, Stainless Steel - 5/8" x 16" | 1 |
|
Combination Camera Rod Starter | 2 |
|
1 1/4" Pipe - 18 in | 2 |
|
|
1 1/4" Pipe - 2 ft | 2 |
|
|
1 1/4" Pipe - 15 in | 2 |
|
|
1 1/4" Pipe - 1 ft | 2 |
|
Mitchell Plate Adapter to 100mm Ball | 1 |
|
Mitchell Washer | 1 |
|
CineMilled Mitchell Washer with 3/8" Tie-Down Knob | 1 |
|
Bolt - 3/8" x 1 1/2" | 7 |
|
|
Wing Nut - 3/8" | 7 |
|
|
Fender Washer - 3/8" | 4 |
|
|
Washer - 3/8" | 3 |
|
Allen Wrench | 1 |
|
|
Wrench | 1 |
|
Milk Crate | 1 |
